Panasonic ET-JPF200BK Operating Instructions Manual page 9

Mounting procedure (continued)
Rubber feet
Opening
Protrusion
Power supply unit
Tab
<AC IN> socket
2) Orient the floor stand to match the projector
orientation.
z Place the floor stand so that the rubber feet are
facing upward and then orient it to match the
projector orientation.
3) Mount the floor stand to the projector.
z Align the opening in the floor stand with the
position of the protrusion on the projector.
4) Slide the floor stand.
z Slide the floor stand so that the tab fits into
place into the <AC IN> socket side of the power
supply unit of the projector.
ENGLISH - 9