Weishaupt WL30/1-C Z-1LN-A Installation And Operating Instruction page 105

83325802 1/2022-01 La
Installation and operating instruction
Oil burner WL30/1-C Z-1LN-A
Pos. Description
5.16 Nozzle assembly complete WL30/1-C Z-1LN-A
– Standard
– extended by 100 mm*
– extended by 200 mm*
5.17 Setting gauge
5.18 Adjusting lever top part
5.19 Adjusting lever bottom part
5.20 Screw M4 x 12 Torx-Plus 20IP
5.21 Indicating bolt M6 x 90
5.22 Cap 5.25 natural
5.23 Adjusting screw M6 x 88
5.24 Spring washer A6 DIN 137
5.25 Hexagonal nut M6 DIN 934
5.26 Hexagonal nut M6 DIN 985
5.27 O ring 42 x 3 NBR70 ISO 3601
5.28 Nozzle assembly cover complete (QRB4)
5.29 View port glass
5.30 O ring 33.5 x 3.55 NBR70 ISO 3601
5.31 Bracket for oil lines
5.32 Shut off grommet
5.33 Flange AGK42 QRB4
5.34 Blind rivet F4 x 10 Al
5.35 Flame sensor QRB4A**
5.36 Strap AKG43 for QRB4
* Only in conjunction with combustion head extension.
** Flame sensor QRB4 is not suitable for continuous operation.
105-112
13 Spares
Order No.
241 310 10 010
240 310 10 070
240 310 10 080
241 110 00 017
241 400 10 077
241 400 10 067
409 237
241 110 10 097
241 110 10 087
241 400 10 097
431 615
411 301
411 302
445 128
241 310 01 152
241 400 01 377
445 177
241 310 14 067
756 159
600 682
426 331
241 210 12 052
600 681