Making Phone Calls; Completing Calls - Grandstream Networks GXP21 Series User Manual

Characters Input
The GXP21xx keypad can be used by tapping on an input field. GXP21xx keypad has 4 modes "123", "ABC", "abc" and "1Bc".
Default mode is "1Bc". Note: If the input field is accepting only digits, only "123" mode will be available.
"123" Mode: This mode allows to enter digits and . only.
"ABC" Mode: This mode allows to enter capital letters, digits and symbolic characters.
"abc" Mode: This mode allows to enter small letters, digits and symbolic characters.
"1Bc" Mode: This mode allows to enter capital letters, small letters, digits and symbolic characters.
Following table describes allowed characters for each key.
Key Description
1 1 Space . : / ' ` @ * + – = , | & ? ! % ( ) ~ _ < > { } [ ] ^
4 4 G H I g h i
7 7 P Q R S p q r s
* *

Making Phone Calls

Handset, Speaker and Headset Mode
The GXP2130/GXP2140/GXP2160/GXP2170/GXP2135 allows users to switch among handset, speaker or headset when making
calls. Press the Hook Switch to switch to handset; press the Headset button to switch to headset; or press the Speaker button
to switch to speaker.
Multiple SIP Accounts and Lines
GXP2160/GXP2170 can support up to 6 independent SIP accounts; GXP2140 can support up to 4 independent SIP accounts;
GXP2130 can support up to 3 independent SIP accounts. Each account is capable of independent SIP server, user and NAT
settings. Each of the line buttons is "virtually" mapped to an individual SIP account. In off hook state, select an idle line and
the dial tone will be heard.
To make a call, select the line you wish to use. The corresponding LINE LED will light up in green. The user can switch lines
before dialing any number by pressing the LINE buttons.
For example: If 2 independent accounts are registered on GXP2130 / GXP2140 / GXP2160 / GXP2170/GXP2135, when LINE 1
is pressed, the LINE 1 LED will light up in green. If LINE 2 is pressed, the LINE 2 LED will light up in green and the subsequent
call will be made through SIP account 2.
Incoming calls to a specific account will attempt to use its corresponding LINE if it is not in use. When the "virtually" mapped
line is in use, the phone will flash the other available LINE in red. A line is ACTIVE when it is in use and the corresponding LED
is red.

Completing Calls

There are several ways to complete a call.
On hook dialing. Enter the number when the phone is on hook and then send out.
When the phone is in idle, enter the number to be dialed out;
Key Description Key
2 2 A B C a b c 3
5 5 J K L j k l 6
8 8 T U V t u v 9
0 0 #
Description
3 D E F d e f
6 M N O m n o
9 W X Y Z w x y z
#