Download
Share
Print this page
Grandstream Networks GXP2160 Setup Manual
  1. Manuals
  2. Brands
  3. Grandstream Networks Manuals
  4. IP Phone
  5. GXP2160
  6. Setup manual
Grandstream Networks GXP2160 Setup Manual

Grandstream Networks GXP2160 Setup Manual

Hide thumbs Also See for GXP2160:

Advertisement

Quick Links

Download this manual See also: Administration Manual, Basic Instructions
Grandstream GXP2160
and Elastix Server
Setup Guide
http://www.elastix.org

Advertisement

loading
Need help?

Need help?

Do you have a question about the GXP2160 and is the answer not in the manual?

Questions and answers

Related Manuals for Grandstream Networks GXP2160

Summary of Contents for Grandstream Networks GXP2160

  • Page 1 Grandstream GXP2160 and Elastix Server Setup Guide http://www.elastix.org...

  • Page 2: Setup Diagram

    PaloSanto Solutions Grandstream GXP2160 Server Setup Guide 1.0 Setup Diagram Figure 1-1 is a setup diagram for a single IP phone Grandstream GXP2160 configuration. The phone is setup as a SIP telephony device. Figure 1-1. Setup Diagram 2.0 Host PC Environment Table 2-1.

  • Page 3: Setup Procedure

    Grandstream GXP2160 Server Setup Guide 4.0 Setup Procedure To set up the Elastix Server for the Grandstream GXP2160 1. Go to the web address of the Elastix Server Login page. The web address is determined by the customer, for this guide we have used the IP address 192.168.5.186 2.
  • Page 4 PaloSanto Solutions Grandstream GXP2160 Server Setup Guide Figure 4-2. Dashboard 5. Click on the Submit button to add an extension, see Figure 4-3. This will take you to the Add SIP Extension page. Figure 4-3. Add an Extension 6. On the Add SIP Extension page (Figure 4-4), fill in the following information: •...
  • Page 5 8. With this you have just finished creating a SIP extension that will be used by the Grandstream GXP2160 to register with the Elastix Server. Repeat Steps 5 through 7 to similarly create another extension (different values on Step 6) to be used by the IP (SIP) Phone to register as well (extension 101 in this example).
  • Page 6 Web Access Password 10. Log in to the Grandstream GXP2160 WebUI by pointing your browser to the Grandstream Phone’s IP address. 11. When prompted, enter the Web Access Password to accesss to the WebUI (Figure 4- Figure 4-7 Grandstream WebUI To register the Grandstream GXP2160 Phone we have two methods: Manual Configuration and Autoprovisioning using Elastix’s Endpoint Configurator.

  • Page 7: Manual Configuration

    PaloSanto Solutions Grandstream GXP2160 Server Setup Guide MANUAL CONFIGURATION 1. Use the information from the Add SIP Extension page (Figure 4-4) to enter the following necessary information on “Account => Account 1” section of the Grandstream Phone WebUI (Figure 4-8): ...
  • Page 8 Figure 4-9. Status 3. Configure the other IP (SIP) Phone with the correct parameters. 4. To test the Grandstream GXP2160, pick up the previously configured IP (SIP) Phone and call the GXP2160’s extension number (101 in this example). When the call is established, speak into the phone and verify that the other IP (SIP) Phone can hear your voice.
  • Page 9 PaloSanto Solutions Grandstream GXP2160 Server Setup Guide AUTOPROVISIONING USING ELASTIX’S ENDPOINT CONFIGURATOR Note: Endpoint Configurator support available starting Elastix 2.5 RC 1. After installation, in the Elastix Web Interface go to “PBX => Batch Configurations => Endpoint Configurator”. See figure 4-10 Figure 4-10.
  • Page 10 PaloSanto Solutions Grandstream GXP2160 Server Setup Guide left to right. Then click on Apply button. See figure 4-12. Figure 4-12. Accounts configuration 5. After configuring you will see that the status field of the phone has changed. See figure 4-13 Figure 4-13.
  • Page 11 PaloSanto Solutions Grandstream GXP2160 Server Setup Guide Figure 4-14. Configuration successful 7. Your phone will reboot, and when it boots up it should be registered with Elastix with the accounts you set. This step completes the procedure.