Managed Layer 2 Switches GSM7212, GSM7224, and GSM7248 Hardware Installation Guide
After you connect a console to the switch, you will need to configure the switch.
The following documents are provided for this purpose:
•
Quick Install Guide: Explains basic setup and configuration (provided as both
a print document and in PDF format on the NETGEAR CD).
•
Command Line Interface Reference for the ProSafe 7200 Series Layer-2
Switches: Gives detailed examples of how to use the CLI, and is located on
the NETGEAR CD.
•
Administration Manual for the 7200 Series Layer-2 Switches: Describes
configuration tasks, and is located on the NETGEAR CD.
Hardware Installation
v1.0, March 2006
3-9