Panasonic NU-MX100P Operating Instructions Manual page 4

Multifunctional steam sterilizer and dryer
Hide thumbs Also See for NU-MX100P:
Table of Contents

Advertisement

Available languages

Available languages

*Data prepared by Panasonic with test conditions - ambient
temperature 25℃, one PP material 300 ml wide-neck bottle,
and indicated milk temperature and milk volume in chart.
Note:
You may turn off the product manually and take out the
baby bottle when the milk temperature is appropriate.
Drip the milk on the back of your hand to
test the temperature before feeding
Reheating/Steaming Function
(1) Measure 90 ml water with the measuring cup (maximum
200 ml) and pour it into the water storage tank of the base.
(2) Place the body on the base, put the container with food
(of proper volume) on a stable place in the body, and
then cover it with the lid.
(3) Turn on the power supply, press the Power Pad "
(4) Press the Reheating/Steam Pad "
program, and press the Pads "
the desired time of 3-15 minutes.
*The default setting for reheating/steaming is 6 minutes.
(5) If there is no further operation in 3 seconds, it will enter
working state after a "Beep" Sound.
(6) The product heats the water in the water storage tank
quickly to turn it into steam for heating. The product will
beep 3 times and the indicator will flash after the program.
The food should not be heated for too long.
Sterilizing Function
(1) Measure 90 ml water with the measuring cup (maximum
200 ml) and pour it into the water storage tank of the
base.
(2) Place the body on the base, put the baby bottles, teats
and other small items to be sterilized in the body of the
product, and cover it with the lid.
(3) Turn on the power supply, press the Power Pad "
(4) Press the Sterilizing Pad "
and the product will enter working state after a "Beep" if
there is no further operation in 3 seconds.
(5) The product will beep 3 times and the indicator will flash
after the water is dried up and the program finishes.
Note: The water storage tank of the base can hold water
up to 200 ml. It is recommended that at least 90
ml of water should be added. The more water is
added, the longer the working time will be. The
product can work for about 20 minutes at most
or until it automatically shuts down.
Referential Chart for Added Water and Approximate
Sterilization Duration*
Added water volume
Sterilization duration
90 ml
120 ml
7-10 mins
10-13 mins
Eng-3
" to enter this
" and "
" to enter this program,
150 ml
12-17 mins
".
" to select
".
200 ml
18-23 mins

Advertisement

Table of Contents
loading

Table of Contents