Editing A Custom Picture File's Settings; Copying Custom Picture Files; Embedding The Custom Picture File In Clips; Look Files - Canon EOS C300 Mark III Manual

Editing a Custom Picture File's Settings

1 Select a custom picture file (A 127).
/
2 Select > [ Custom Picture] > [Edit
3 Select a setting you wish to change and select the desired option.
• Refer to Available Custom Picture Settings
• Repeat step 3 for other settings as necessary.
• When you close the menu, the new custom picture settings will be applied.

Copying Custom Picture Files

You can copy custom picture files between the camera and SD card. Insert in advance into the camera the card
where you want to save your custom picture files or the card that contains the custom picture file you want to
load.
Copying a File from the Camera to an SD Card
1 Select a custom picture file (A 127).
2 Select > [/ Custom Picture] > [Save / File] > [Save to SD Card].
3 Select the destination file on the card and then select [OK].
• Select an existing custom picture file to overwrite it or [New File] to save the settings as a new custom
picture file on the card.
4 When the confirmation message appears, press SET.
Replacing a File in the Camera with a File on an SD Card
1 Select the custom picture file that you wish to replace (A 127).
2 Select > [/ Custom Picture] > [Save / File] > [Load from SD Card].
3 Select the file with the settings that you want to replicate and then select [OK].
• The file in the camera will be overwritten by the one on the card.
4 When the confirmation message appears, press SET.

Embedding the Custom Picture File in Clips

When you record in XF-AVC format after having set custom picture settings, you can have the custom picture file
embedded in the metadata and saved along with the clips.
> [Æ Recording/Media Setup] > [Metadata] > [Add / File] > [On].
Select

Look Files

You can register 3D LUT files (.cube format) created with Blackmagic Design's DaVinci Resolve or other software
as Look Files in the custom picture file. Using a Look File allows you to adjust the video quality of the recorded
video. These adjustments apply also to proxy clips, photos, and screen/output terminals.
1 Insert the SD card with the desired Look File (.cube format, located in the root directory of the SD
card) into the camera's SD card slot.
2 Select a custom picture file. (A 127)
/
File].
(A 131) for details on the various settings.
Custom Picture Settings
129