NETGEAR ProSafe FSM7328PS Hardware Installation Manual page 37

Managed Stackable Layer 3 Fast Ethernet Switches Hardware Installation Guide
Table A-2. Technical Specifications for the FSM7352S and FSM7352PS Switches
Feature
IEEE Network Protocol
and Standards
compatibility
Interface
(Auto Uplink on all RJ-45
ports)
Performance
Ports (Auto Uplink and
auto-sensing)
Addressing
10/100/1000 buffer
memory
Acoustic noise (ANSI-
S10.12)
Heat dissipation
Technical Specifications
FSM7352S
• 802.3 10BASE-T
• 802.3u 100BASE-TX
• 802.3z 1000BASE-SX
• 802.3ab 1000BASE-T
• 802.3x flow control
• 48 RJ-45 connectors for 10BASE-T
and 100BASE-TX
• 4 RJ-45 connectors for 10BASE-T,
100BASE-TX, and 1000BASE-T
• 4 Gigabit Interface Converter (SFP)
slots for SFP modules
• RS-232 console port
• Forwarding modes: store-and-
forward
• Bandwidth: 17.6 Gbps
• Network latency: Less than 80
microseconds for 64-byte frames in
store-and-forward mode for
10 Mbps to 100 Mbps transmission
• 48 10/100 Mbps ports
• 4 10/100/100 Mbps Ethernet TP ports
• 4 gigabit ports to stack up to 8
switches
• Full- and half-duplex functions
• 16,384 media access control (MAC) addresses per system
• 48-bit MAC address
32-MB embedded memory for 52 ports 32-MB embedded memory for 52 ports
56.07 dB
18.99 Btu/hr
v1.0, May 2007
FSM7352PS
• 802.3 10BASE-T
• 802.3u 100BASE-TX
• 802.3z 1000BASE-SX
• 802.3ab 1000BASE-T
• 802.3x flow control
• 802.3af Power over Ethernet
• 48 RJ-45 connectors for 10BASE-T
and 100BASE-TX
• 4 RJ-45 connectors for 10BASE-T,
100BASE-TX, and 1000BASE-T
• 4 Gigabit Interface Converter (SFP)
slots for SFP modules
• RS-232 console port
• Forwarding modes: store-and-
forward
• Bandwidth: 17.6 Gbps
• Network latency: Less than 80
microseconds for 64-byte frames in
store-and-forward mode for
10 Mbps to 100 Mbps transmission
• 48 10/100 Mbps ports
• 4 10/100/100 Mbps Fast Ethernet TP
ports
• 4 gigabit ports to stack up to 8
switches
• Full- and half-duplex functions
• Power over Ethernet (PoE) support
on all 48 10/100 Mbps ports based on
IEE 802.3af standard
• IEEE 802.3af power budget: Full
power for up to 24 ports, 7 W per port
for 48 ports
<52 dB
A-3