NETGEAR ProSafe FSM7328PS Hardware Installation Manual page 20

Managed Stackable Layer 3 Fast Ethernet Switches Hardware Installation Guide
•
•
•
•
•
•
2-12
Observe extension cable and power strip ratings. Make sure that the total
ampere rating of all products plugged into the extension cable or power strip
does not exceed 80 percent of the ampere ratings limit for the extension cable
or power strip.
To help protect your system from sudden, transient increases and decreases in
electrical power, use a surge suppressor, line conditioner, or uninterruptible
power supply (UPS).
Position system cables and power cables carefully; route cables so that they
cannot be stepped on or tripped over. Be sure that nothing rests on any cables.
Do not modify power cables or plugs. Consult a licensed electrician or your
power company for site modifications.
Always follow your local and national wiring rules.
Move products with care; ensure that all casters and stabilizers are firmly
connected to the system. Avoid sudden stops and uneven surfaces.
v1.0, May 2007
Introduction