Teltonika RUT240 User Manual page 86

Field name
1. Eoable
2. IKE versioo
3. Mode
4. My ideotfer type
5. My ideotfer
6. Dead Peer
Detectoo
7. Pre shared key
8. Remote VPN
eodpoiot
9. IP
address/Suboet
mask
10. Eoable keep alive
11. Host
12. Piog period (sec)
Phase 1 aod Phase 2 must be coofgured accordiogly to the IPSec server coofguratoon thus algorithmsn
autheotcatoo aod lifetmes of each phase must be ideotcal.
Value Explanaton
Eoabled/Disabled Check box to eoable IPSec.
IKEv1 or IKEv2 Method of key exchaoge
"Maio" or ISAKMP (Ioteroet Security Associatoo aod Key Maoagemeot Protocol)
"Aggressive" phase 1 exchaoge mode
Addressn FQDNn Choose ooe accordiogly to your IPSec coofguratoo
User FQDN
Set the device ideotfer for IPSec tuooel.
Io case RUT has Private IPn its ideotfer should be its owo LAN oetwork
address. Io this wayn the Road Warrior approach is possible.
Eoabled/Disabled The values clearn hold aod restart all actve DPD
A shared password to autheotcate betweeo the peer
Domaio oame or IP address. Leave empty or aoy
Remote oetwork secure group IP address aod mask used to determioe to
what suboet ao IP address beloogs to. Raoge [0-32]. IP should differ from
device LAN IP
Eoabled/Disabled Eoable tuooel keep alive fuoctoo
A host address to which ICMP (Ioteroet Cootrol Message Protocol) echo
requests will be seod
Seod ICMP echo request every x secoods. Raoge [0-999999]
86