Element ERT18CSCW User Manual page 15

Temperature
Control
1 Key
A.Temperature setting button of refrigerator compartment
Indicator light 1.setting 1
Indicator light 2.setting 2
Indicator light 3.setting 3
Indicator light 4.setting 4
Indicator light 5.setting 5
Indicator light 6.standby mode
Once initially powered on,the display screen (including the key light) is on full display for 3s.
Normal operation display
In case of a failure, the appropriate LED light show in combination the failure code (in recycling display).
In case of no failures, the actual operation position of refrigerator will be on display.
After the temperature setting has been completed, the refrigerator will run according to the set value after 25s.
From left to right, the temperature is lower.
The shift regulation is:
When the refrigerator is r
M
When the refrigerator is in standby mode, quickly press the temperature setting button(A), the refrigerator
① ② ③ ④ ⑤ ⑥
A
COLD
SET
Shi� 1 Shi� 2
unning, press the temperature setting button(A) for 3s, the refrigerator enter into
M
STANDBY
COLDEST
Shi� 3 Shi� 4
light shines.
13
Hold SET-button for 3-sec
for standby
Shi� 5