Disconnecting/Connecting Fine-Wire Coaxial Cable - Sony AXS-R7 Service Manual
Portable memory recorder
Hide thumbs
Also See for AXS-R7:
- Operating instructions manual (10 pages) ,
- Operating instructions manual (81 pages) ,
- Quick start manual (3 pages)
Table of Contents
Advertisement
1-11.
Disconnecting/Connecting Fine-Wire Coaxial Cable
Note
• Be very careful when handling the fine-wire coaxial cable so that fine wires are not disconnected.
• When disconnecting the fine-wire coaxial cable, be sure to hold the connector. Do not attempt to pull the cable.
• Check that the contact surface of the fine-wire coaxial cable connector is not contaminated.
Disconnecting
1.
Hold both sides of the fine-wire coaxial cable connector, and pull the connector straight to disconnect it.
Connector
Connecting
1.
Insert the connector straight matching the polarity marks.
Note
Inserting the connector at an angle so may damage it.
Insert the connector firmly as far as it will go.
Polarity marks
Connector
AXS-R7
Correct
Connector
Fine-wire coaxial cable
Wrong
Fine-wire coaxial cable
Hold the connector to disconnect.
Do not attempt to disconnect by
pulling the cable.
1-19
Advertisement
Table of Contents
