SUN2000-(330KTL-H1, 330KTL-H2)
User Manual
8.1 Shutdown and Power-Off
After the system is powered off, the SUN2000 is still energized and hot, which
may cause electric shocks or burns. Therefore, wait for at least 15 minutes, wear
PPE, and then operate the SUN2000.
Step 1 Send a shutdown command on the app, SmartLogger, or management system.
For details, see the user manual of the corresponding product.
Step 2 Turn off the AC switch between the SUN2000 and the power grid.
Step 3 Set the two DC SWITCH to OFF.
----End
8.2 Power-Off for Maintenance
Context
To prevent personal injury and equipment damage, perform the following
procedure to power off the SUN2000 for troubleshooting or replacement.
Issue Draft A
(2022-08-30)
WARNING
Copyright © Huawei Technologies Co., Ltd.
8
Maintenance
8 Maintenance
62