Advertisement
Available languages
Available languages
no cause for alarm. Be careful when handling.
VOLTAGE WARNING
Common household current is 110-120 volts. As long as your tool is rated from 110V-120V there
will be no complications using this tool with household receptacles. If your tool is rated
220V-240V it has a completely different style of plug and must be used with 220V-240V
receptacle. Never try to plug a 110V tool into a 220V-240V circuit (or vice-versa) or serious
complications will arise, including possible injury to the operator. The plugs and receptacle have
completely different shapes to prevent this from occurring accidentally. Do not modify your plug
in any way. If you any doubts, call a qualified electrician.
OPERATION
1．
2.Press 2#(Button),make 4#( Spring Leaf) expands;(See Figure 2)
Put 40#(Hold Accessory) into 7#(Fixing Shelf), make 35#(Position for Blade)stuck in 7#(Fixing
Shell) at correct position.( See Figure3;)
3. Adjusting the drill bit position, make the top of drill bit touches 6#(Terminal) firmly, 4#( spring
leaf )pinch the groove of drill bit;(See Figure 4 & 5)
4. Rotate 39#(Locknut), make 36# (Blade Holer)pinch the drill bit firmly;
Take hold 35#(Positioner for Blade), release 36#(Blade
Holder) by turning 39#(Locknut).; put drill bit into
35#(Positioner For Blade).(See Figure1)
(Figure 2)
(Figure 4)
5
(Figure 3)
(Figure 5)
Advertisement
