Advertisement
Available languages
Available languages
"Caution – Read the operating instructions to reduce the risk of injury"
Wear safety goggles. Sparks generated during working or splinters, chips and dust
Wear ear-muffs. The impact of noise can cause damage to hearing.
Wear gloves. You must wear gloves at all times when handling the drill bits.
Power
Working Capacity
SAVE THIS MANUAL
You will need the manual for the safety warnings and cautions, assembly instructions, operating
procedures, maintenance procedures, trouble shooting, parts list, and diagram.
SAFETY WARNING &CAUTIONS
WARNING: When using electric tools, machines, or equipment, basic precautions should always
be followed to reduce the risk of fire, electric shock, and personal injury.
READ ALL INSTRUCTIONS BEFORE USING THIS TOOL!
1. KEEP WORK AREA CLEAN. Cluttered areas invite injuries.
2. OBSERVE WORK AREA CONDITIONS. Do not use machines or power tools in damp, wet,
or poorly lit locations. Don't expose to rain. Keep work area well lit. Do not use electrically
powered tools in the presence of flammable gasses or liquids.
3. KEEP CHILD AWAY. Children must never be allowed in the work area. Do not let handle
machines, tools, or extension cords.
4. STORE IDLE EQUIPMENT. When not in use, tools must be locked up in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5. DO NOT FORCE THE TOOL. It will do the job better and more safety at the rate for which it
was intended. Do not use inappropriate attachments in an attempt to exceed the tool's
capacities.
6. USE THE RIGHT TOOL FOR THE JOB. Do not attempt to force a small tool or attachment
to do the work of large industrial tool. Do not use a tool for a purpose for which it was not
intended.
7. DRESS PROPERLY. Do not wear loose clothing or jewelry as they can be caught in moving
parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended
emitted by the device can cause loss of sight.
SPECIFICATIONS
230V,50Hz;85W, 4200RPM
9/64" to 33/64"(3mm to 13mm)
(the length is no less than 85mm)
3
Advertisement
