Related Manuals for TREQ ACE
Summary of Contents for TREQ ACE
- Page 1 TREQ ACE INSTRUCTION MANUAL The setup of your rig is very dependent on body type, personal seating preferences and the equipment you own, but to give you a head start, we included a setup scheme on the last page. REQUIRED TOOLS:...
-
Page 2: General Instructions
But on some places of the rig these corner brackets are placed on a 90° angle of the T-slot. In these situations it is recommended to break off 2 of the hooks, which is easily done with a screwdriver. Break! REQUIRED TOOL: www.treq-sim.com... - Page 3 Profile 8040 L=580 Profile 4040 L=478 Profile 8040 L=90 Profile 16040 L=1185 Profile 16040 L=500 Profile 8040 L=478 Profile 12040 L=740 Pedal Bracket Right Pedal Bracket Left Wheel Mount Bracket Corner Cover 4040 Corner 4040 Cover 4040 Cover 12080 Cover 16080 www.treq-sim.com...
-
Page 4: Cable Management
M6 Washer M6 T-Nut Click-in-Nut CABLE MANAGEMENT M4x12 Screw M4 T-Nut Click-in-Nut You can use these on any place you like. Either Cable Binder inside the profile slot (just turn the bolt through the tape), or by pasting them. www.treq-sim.com... - Page 5 Profile 16040 L=1185 (2x) (4x) (4x) (16x) (These come from the ‘Rubber Feet’ bag) (4x) M5x12 (4x) www.treq-sim.com...
- Page 6 (12x) M8x16 (16x) www.treq-sim.com...
- Page 7 Profile 4040 L=500 (2x) (4x) (8x) M8x16 The width of the two 4040 profiles is depended on your Break the seat, so you might want to pins! wait before tightening them! www.treq-sim.com...
- Page 8 Profile 12040 L=740 (2x) (8x) (16x) Break the pins! www.treq-sim.com...
- Page 9 Assembly of Pedal Bracket Profile 8040 L=478 (1x) Profile 4040 L=478 (2x) M8x20 (Black) (2x) (2x) M8x20 (Black) (6x) Assemble the Pedal Bracket on Frame Hand greep (4x) www.treq-sim.com...
- Page 10 Assembly of Wheel Mount Assembly Profile 8040 L=580 (1x) (14x) Profile 8040 L=90 (2x) (10x) www.treq-sim.com...
- Page 11 170mm 170mm M8x16 (8x) (4x) www.treq-sim.com...
- Page 12 (8x) M8x16 (4x) (2x) www.treq-sim.com...
- Page 13 (6x) (6x) M8x16 (Black) Assembly of Wheel Mount Assembly on Frame M8x16 (12x) www.treq-sim.com...
- Page 14 Adjust Pedal Bracket and Wheel Mount Assembly to desired position (see step 19 for a setup drawing). www.treq-sim.com...
- Page 15 (4x) (4x) (4x) (26x) www.treq-sim.com...
- Page 16 To mount these type of pedals, please use the spare corner brackets. Mount 1 side to a pedaldeck-profile and the other to the pedals. For Fanatec or Heusinkveld pedals you can use click-in-nuts and mount them ‘from the top’. www.treq-sim.com...
- Page 17 When first building your rig, we recommend putting S on 31 cm. Don’t tighten the bolts of the steering rack too much, because there is a big chance you’re going to adjust it after you mount a steering wheel. www.treq-sim.com...
Need help?
Do you have a question about the ACE and is the answer not in the manual?
Questions and answers