NetComm NP290W Specifications

Turbo Data Rates of up to 85Mbps
56 Bit DES Security
Extend Your Wireless Range
Portable Ethernet Wireless Access Point
Additional Ethernet Port for Wired Applications
Consistent and Reliable Wireless Connectivity
Overcome Problems with Thick Walls and Blind Spots
Transforms Standard Power Sockets to a Wireless Access Point/ Client
No new cables, no drilling. Plug and Play
Instant wireless networking with NetComm's NP290W HomePlug
HomePlugs transform your in-house power circuit into an Instant Ethernet
Network without the need to install new cables or drill holes through walls
and floors.
With the NP290W Turbo Wireless Homeplug you can connect any wireless
enabled device to your HomePlug "network", including PCs, laptops, gaming
consoles, IP Cameras and ADSL Modem/Routers. In fact anything that has
Wireless capabilities.
With a data carrier rate of up to 85Mbps using the ethernet port and up to
54Mbps using the wireless connection and a range of 200 metres, HomePlugs
are the ideal way to extend your network access to any room or any floor in
your home or office. HomePlugs are also secure, using DES encryption to keep
your data secure from eavesdroppers.
No more worries about wireless blackspots, no more hassle of having to
stream lengths of ethernet cable. NetComm HomePlugs are networking,
without the work.
NetComm NP290W
Turbo Wireless HomePlug – 85Mbps Ethernet Over Power Kit
Firewall ADSL2+
KEY FEATURES
QoS
1
Connect one HomePlug adaptor to an ADSL or
Cable Modem using the supplied Ethernet cable.
1
Connect one HomePlug adaptor to an ADSL or
Cable Modem using the supplied Ethernet cable.
1
Connect one HomePlug adaptor to an ADSL or
Cable Modem using the supplied Ethernet cable.
2
Plug the HomePlug adaptor into a power socket. Plug the
wireless adaptor into a power socket where you want to
2
extend your wireless coverage.
Plug the HomePlug adaptor into a power socket. Plug the
wireless adaptor into a power socket where you want to
extend your wireless coverage.
2
Plug the HomePlug adaptor into a power socket. Plug the
wireless adaptor into a power socket where you want to
extend your wireless coverage.
3
Finally, you can connect the NP290W to the
Ethernet port of your PC or gaming console
3
to access your network wirelessly.
Finally, you can connect the NP290W to the
Ethernet port of your PC or gaming console
to access your network wirelessly.
Finally, you can connect the NP290W to the
Ethernet port of your PC or gaming console
to access your network wirelessly.
USB Wireless