MoCA LED:MoCA link status
MoCA is connected.
MA-25 is transmitting or receiving data via MoCA connection.
ETH LED: Ethernet status
MA-25 is connected to Ethernet.
MA-25 is transmitting or receiving data via Ethernet connection.
Security LED: MoCA Security is enabled/ disabled.
MoCA security is enabled.
MoCA security is disabled.
MoCA Adapter 1
Connect the MoCA Adapter 1 to your router, Mesh router or modem.
MoCA Adapter 2
Connect the MoCA Adapter 2 to your Mesh node or devices.
NOTE: If you want to add the MA-25 to an existing MoCA 2.5 Network with different security/privacy settings, MPS is required.
To use MPS:
If you are using DOCSIS 3.1 coexisting with the MoCA network, choose Mode 1 to avoid interference; if not, stay on Mode 2.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.