Autool DOT3 Manual

Foreword
This manual provides the usage of this brake fluid tester and the basic profes-
sional knowledge required, including the safety instructions and effective test
instructions for the device, so that the technician can use the device to
perform brake fluid testing. Please read this manual carefully before using the
product for the first time and refer to the following documents to assist in
diagnosis.
● Vehicle Original Service Manual
● Related technical bulletins
● The Material Safety Data Sheet (MSDS) provided by brake fluid
manufacturer. Please put the relevant documents in the portable box of this
device for easy checking at any time.
Safety instructions
General safety guidelines
● Please read this manual before the first use
● Please wear goggles when working and be careful not to splash brake
fluid into your eyes
● Do not perform the test without sufficient liquid in the beaker (the test
stick can be damaged by empty boiling)
● Do not touch to avoid burns after the test, as the test stick and liquid
are at high temperature.
● Do not pour the brake fluid back into the reservoir as the structure of
the fluid has been damaged and the boiling point has been lowered,
otherwise, it will affect driving safety.
● After the test, please empty the brake fluid and fill another 50ml of
water to test the boiling point in order to clean the residual brake fluid of the
test stick.
● If the same brake fluid sample is tested continuously and the data
varies, this is normal because the test sample has been boiled and the
structure has changed.
Statement
● This equipment is designed for brake fluid detection and is not responsi-
ble for any product damage or property damage caused by its use for other
purposes.