Edit A Contact Before The Call - Cisco TelePresence CE9.13 User Manual

Video Calls

Edit a Contact Before the Call

1
Make sure Call is selected (the leftmost icon
along the bottom of the screen) and press
OK on the remote control or press the
green Call button on the remote control.
4
Use the Cursor keys on the remote control
to navigate to the More field ( ... ) and press
OK.
D15097.23 Cisco TelePresence SX10, SX20 User Guide JUNE 2020
All contents © 2020 Cisco Systems, Inc. All rights reserved
2
Use the Cursor keys on the remote control
to navigate between Favorites, Recents and
Directory and then down in one of the lists.
5
Navigate down to Edit and Call (center
field in the More menu) an press OK.
3
Once an entry has been located, press OK
on the remote control to invoke the Call
menu.
6
Edit the entry as required and press the
green Call button on the remote control to
place the call.
About Editing
For more on the Contacts list, see
the previous page.
You may need to edit an entry in
one of the lists of Contacts before
you place the call, such as to add
a prefix, a suffix, or otherwise alter
the entry to ensure success.
9