Table of Contents
Advertisement
Quick Links
VECTECH 492EP
WRIST STRAP & FOOTWEAR TESTER
MANUAL OPERATION
Thank you for purchasing this tester. The device is exclusively designed for testing the wearing
of the wrist strap and footwear. Please carefully read this manual before operating the device.
Store this manual in a safe, easily accessible place for future reference.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for VECTECH 492EP
Summary of Contents for VECTECH 492EP
- Page 1 VECTECH 492EP WRIST STRAP & FOOTWEAR TESTER MANUAL OPERATION Thank you for purchasing this tester. The device is exclusively designed for testing the wearing of the wrist strap and footwear. Please carefully read this manual before operating the device. Store this manual in a safe, easily accessible place for future reference.
-
Page 2: Specifications And Characteristics
1. Summary This tester is a kind of can convenient to quickly test the wrist and fo ot ring, conductive shoes or anti-static shoes the wear of the device, according to GJB 3007-97, SJ/T 10694-1996 and the ESD S20.20 AN SI standard production. -
Page 3: Installation And Connection
Wrist strap’s resistance ±10% Precision: Footwear’s resistance ±10% 0.6kg Weight: 160mm×100mm×40mm Out size: 3.2 Characteristics 1. This tester can not only separate test wrist band, one foot or both feet (foot ring, conductive shoes, anti-static shoes) wear;And set up a comprehensive test mode, can test the wrist belt and at the same time the foot ring, conductive shoes, anti-static shoes wear situation, save the test time. - Page 4 * Note: the foot end test cable connection, please test the connection is correct.If the test cables plugged into the wrong foot end, output indicator will foot, please exchange connection plug location at this time. Fixed columns: after connected at the bottom of the well, remove the package of three 6 x 25 hex socket screws, according to the icon will be fixed on the column base plate, the post tighten screw Fixed column panel: after connected at the top of the line, using column panel comes with...
-
Page 5: Test Description
Note: if you are connected to the entrance guard system, please contact switch signal in 。 accordance with the requirements, otherwise you may damage the tester or cause an accident Once the password after the success, need to input the correct password to set the parameters of 5. -
Page 6: Port Setting
8.PC software Settings When dial the code switch 4 in (ON) and dial the code switch 7 next (OFF), said the tests of 8.1 System Settings MΩ; the foot high of 1000 There are three sub menu system Settings, "set alarm", "serial port Settings", and "password" When dial the code switch 4 and 7 are all next (OFF), said the tests of the foot high of 100M Ω... -
Page 7: Calibration Method
100KΩ/500 KΩ/750KΩ-35MΩ/100MΩ/1000MΩ 表 2 数字拨码开关功能说明 Test range oot ring, Page6 conductive or anti-static shoes Page 5 set "mode controlled by toggle switch" or "instrument address number 开关 1 Standard Result controlled by toggle switch” 开关 2 Used to set up "mode is controlled by a toggle switch" or "instrument 90KΩ... - Page 8 5.4.2 Comprehensive Test Table 3 dial the code switch - address Settings Page 11 1.Check whether the end test cable connection plug connection is correct Code switch Address 2.Wear a wrist band, foot ring, conductive or anti-static shoes wear good shoes. 3.The WRIST band cable directly inserted into the WRIST band jack (WRIST CORD) or connected to a connection column.
-
Page 9: Test Specification
Page 7 5.4.1 Separate Test 5.3 The online Test Page 8 1. Good connection communication mouth and the comprehensive test instrument, and then Separate test state, can test the wrist band or foot ring, conductive shoes, anti-static shoes wear choose the need to test on the 492 ep software "wrist band", "left" or "right". conditions. - Page 10 Page 9...
Need help?
Do you have a question about the 492EP and is the answer not in the manual?
Questions and answers