Part 2 Product overview and connections
Introduction
This administrator guide describes how to set up, connect cables, and configure your ST2030 SIP
Phone. It also provides information on how to configure the Network settings and change the
settings of your IP Phone. The administrator guide also includes the way to view and upgrade the
firmware.
Note and Caution
Note and Caution in this manual are highlighted with graphics as below to indicate important information.
Contains related information that corresponds to a topic.
Note
Represents essential steps, actions, or messages that should not be ignored.
Caution
Package contents
1. IP phone base unit
2. Handset
3. Coiled handset connecting cord
4. Quick installation and user guide
5. 1 Ethernet cable
6. 1 Power supply
Not included: Ethernet cable to connect any PC to the telephone through its PC switch
Optional: Extension module with 28 memory keys and headset
(e) ST2030 with
Extension module
(optional)
Figure 2.1 IP Phone Cable Connections
ST2030s SIP Administrator Guide v3.0
(a) hub
(b) PC
Network
(c) Power supply
ST2030s VoIP Business Phone
(d) headset (optional)
handset
Page 3 of 308