ICON ProCon SSBS35 Operating Manual

Process ph sensor

P14 Series

Process pH Sensor

Operating Manual

Table of Contents

Need help?

Do you have a question about the ProCon SSBS35 and is the answer not in the manual?

Page 1 P14 Series Process pH Sensor Operating Manual...
Page 2: Preparation Before Measurement
ProCon P14 Series pH Sensor Operating Manual ® Preface Please read this manual carefully before use. When receiving the instrument, please open the package carefully, check to ensure the instrument and accessories have not been damaged during transportation. If any issues are found, please contact our after-sales service department or regional customer service center.
Page 3 ProCon P14 Series pH Sensor Operating Manual ® In order to ensure a fast response time, the electrode glass sensing membrane film should always be kept wet. After the measurement or calibration is completed and the electrode is properly cleaned,store the sensor in a 3mol KCI Potassium Chloride solution. This can be done by filling the protection cap with the KCI liquid.
Page 4: Warranty
Warranty Icon Process Controls warrants this product to be free from significant deviations in material and workmanship for a period of one year from the date of purchase. If repair is necessary and has not been the result of abuse or misuse within the warranty period, please return to Icon Process Controls and amendment will be made without any charge.
Page 5 Need a great Controller? Pair your C Series sensor with the industry’s most innovative and standard feature rich controllers icon procon.com Use with any of the following controllers — NO PREAMP REQUIRED SINGLE INPUT DUAL INPUT FIVE INPUT 22-0008...