Related Manuals for Mido R311W
Summary of Contents for Mido R311W
- Page 1 R311W Model： WirelessWater Leak Sensor Water Leak Sensor User Manual MiDo Srl FERRARA Via Poledrelli 21 - 44121 (Fe) +39 0532 1640011 LAURIA Via Vico II Cairoli, 4 - 85044 (Pz) +39 0971 1680051 EMAIL info@midomet.com...
-
Page 2: Table Of Contents
Table of Content 1. Introduction................................................... 2 2. Appearance ................................................... 3 3. Main Features ..................................................3 4.Set up Instruction ................................................... 4 5. Data Report ................................................... 4 6. Installation .................................................... 7 7. Important Maintenance Instruction ............................................8 8. FCC Statement ..................................................8... -
Page 3: Introduction
1. Introduction MiDoMet water leak sensor R311W is a LoRaWAN device compatible with LoRaWAN protocol (ClassA). When the R311W sensor detects a leak, it will send an alarm message to the gateway. When the sensor detects no leaks, it will send a message that shows no leak to the gateway. -
Page 4: Appearance
2. Appearance Indicator ( red/green ) Water Sensor Water Sensor Battery Cover Water Sensor Connection Port Water Sensor Connection Port Function Key Function Key 3. Main Features Compatible with LoRaWAN 2 sections of 3V CR2450 button battery power supply ... -
Page 5: Set Up Instruction
When the device is turned on, it will immediately send a version package. The transmission frequency of sending version package is once every 24 hours. Data will be reported once per hour by default setting. Maximum time: 3600s Minimum time: 3600s Default reportchange: Battery ---- 0x01 (0.1V) R311W sensor is triggered:... - Page 6 When the R311W status changes, it will send warning report. No water leak:0 Water leak:1 Note: The reported data is decoded by the MiDoMet LoRaWAN Application Command document and www.midosmart.com Data report configuration and sending period are as following: ＜...
- Page 7 MaxTime Notes: 1) The device only wakes up and performs data sampling according to MinTime Interval. When it is sleeping, it does not collect data. 1H 10 1H 25 1H 40 1H 55 2H 10 Wakes Wakes Wakes Wakes collects data collects data collects data 2.7V Does...
-
Page 8: Installation
Installation (1) This product does not have a waterproof function. After the screening is completed, please place it indoors. (2) The door magnetic magnet part and the body part are installed on both sides of the door joint or the window joint, and the distance between the two needs to be less than 2cm;... -
Page 9: Important Maintenance Instruction
2.This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. MiDo Srl FERRARA Via Poledrelli 21 - 44121 (Fe)
Need help?
Do you have a question about the R311W and is the answer not in the manual?
Questions and answers