Table of Contents
Advertisement
6. HOW TO REPLACE THE LITHIUM BATTERY
6.1. REPLACEMENT PROCEDURE
1. Remove the MAIN C.B.A. (Refer to Disassembly Procedures.)
2. Remove the Lithium battery (Ref. No. "Z9101" at component side
of MAIN C.B.A.) and then replace it into new one.
NOTE:
This Lithium battery is a critical component. (Type No.: ML614S
Manufactured by Matsushita Battery Industrial Co.,Ltd. )
It must never be subjected to excessive heat or discharge.
It must therefore only be fitted in requirement designed specifically
for its use.
Replacement batteries must be of same type and manufacture.
They must be fitted in the same manner and location as the original
battery, with the correct polarity contacts observed.
Do not attempt to re-charge the old battery or re-use it for any other
purpose.
It should be disposed of in waste products destined for burial
rather than incineration.
11
Advertisement
Table of Contents
