Removing The Plastic Box - Motorola IRRInet-M DC Owner's Manual

Removing the Plastic Box

1. Insert screwdriver in top groove of the
bracket. Press down on tab until the plastic
box separates from the bracket.
2. Gently pull the plastic box away from the
bracket. Lift slightly to remove the lower
tab from the lower groove.
3. If the bracket is mounted on a DIN Rail,
insert a screwdriver in the groove behind
the white DIN Rail clip.
4. Press down until the tab of the DIN Rail
clip is released from the DIN Rail.
5. Repeat for the second DIN Rail clip.
6. Gently pull the bracket to remove it from
the DIN Rail.
Appendix D: Mounting a Plastic Box
Figure 30 Detaching Plastic Box
from Bracket
Figure 31 Detaching Bracket from
DIN Rail
47