Table of Contents
Advertisement
Figure 10 Installation of IRRInet-M – Screw Mount
It is also possible to attach the IRRInet-M to the wall using the small screw hole at the bottom
of case, though this requires dismantling the RTU, which is generally discouraged. Consult
Motorola service personnel before opening the IRRInet-M casing. To mount the RTU:
1. Open the case and dismantle the parts of the IRRInet-M.
2. Secure the back of the case against the wall using a screw whose diameter is less than 0.14"
(3.5 mm) and head size is at least 0.22" (5.5 mm).
3. Reassemble the parts of the IRRInet-M.
Before beginning any disassembly or reassembly procedures, you should
be adequately grounded to prevent damage to static sensitive devices in
the unit.
Wall Mounting on DIN Rail
For mounting the RTU on a DIN rail, two universal foot elements (Phoenix Connectors MFC
PIN UMK-FE) are required. To mount the unit, proceed as follows:
Installation
19
Advertisement
Table of Contents
