Table of Contents
Advertisement
Appendix D: Changing the Analog Input Measurement Type
3. Finally, press the bracket firmly onto the DIN
Rail.
Wall Mount
1. Use the two screws to attach the mounting
bracket to the wall.
2. Insert the tab at the bottom of the plastic
box into the bottom groove of the bracket.
Insert the rest of the plastic box into the
bracket, fitting the two round pegs into the
two holes and the upper tab into the upper
groove. Press until the upper tab clicks in
the groove. (See Figure 27 above.)
46
Figure 28 Attaching Plastic Box to
Wall
Figure 29 Attaching Bracket to Wall
Advertisement
Table of Contents
