Table of Contents
Advertisement
WebUI hierarchy screens
The Network/LAN Settings/LAN and Static DHCP screen appears.
Figure 38
You can configure the following LAN settings:
Click Save Changes.
Note: Check the DHCP range before you change the LAN IP. If you want to use the LAN
IP, which is included in the previous DHCP range, change the DHCP range first. Click Save.
Then, change the LAN IP.
Configure a static route and bind a MAC address to a specific local LAN/IP address
by entering the MAC and IP address in the Static DHCP text boxes.
Click Add.
Your values appear in the table below.
Repeat for all MAC addresses to be bound.
58
Network: LAN Settings
• IPv4 address
• subnet mask
• enable DHCP
• DHCP start IP address
• DHCP end IP address
• DHCP lease time
• static DHCP
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
User Guide for Oceania
3TG-02288-AAAA-TCZZA-02
Hide quick links:
Advertisement
Table of Contents
