Bosch GWS18V-10N Operating/Safety Instructions Manual page 11

2610068708 11-21 GWS18V-10.qxp_GWS 11/17/21 12:41 PM Page 11
Functional Description and Specifications
Model number
Battery
Rated speed
Switch Type
Run-Down Brake
Spindle thread
Max. spindle length
Max.Type 27 grinding wheel ⌀
Type 27 grinding wheel thickness
Max.Type 41/1A, 27A cutting wheel ⌀
Max. flap disc ⌀
Max. sanding disc ⌀
Max. wire wheel ⌀
Max. wire cup brush ⌀
Model Number
Metal Grinding (Type 27)
Metal Grinding (Type 11)
Metal Cutting (Type 41/1A)
Concrete Surfacing
Concrete/Masonry Cutting
Polishing
Sanding
Wire Brushing (Wheel)
Wire Brushing (Cup)
X = Tool is provided with attachments to perform this application.
O = Tool can use optional attachments to perform this application.
N = Tool is not capable of this application.
Accessory speed rating must be equal to or greater than the tool's speed rating. Do not
exceed the recommended wheel diameter.
Application
Do not use Type 11 abrasive (cup) wheels with this tool. This tool is
not designed for use with type 11 (cup) abrasive grinding wheels.
GWS18V-10
18V (Bosch Series)
n 9,000/min
Side
Included
5/8"-11 UNC
9/16" (14,3 mm)
4-1/2"-5" (115-125 mm)
0.25" (6 mm)
4-1/2"-5" (115-125 mm)
4-1/2"-5" (115-125 mm)
4-1/2"-5" (115-125 mm)
5" (125 mm)
3" (76 mm)
GWS18V-10
N
O
O
O
N
O
-11-
X
X
O