I2C Eeprom; Power - F&S efus A9X Manual

5.4

I2C EEPROM

This component is optional and not mounted in all configurations. Please contact sales to get
more information.
6

Power

+5V Power In
GND
VBAT In
V33-Enable
VLCD
(on LVDS connector)
VCC in, 5V +/-5%
GND, connect all GND pins to GND plane
RTC battery input. Leave open if not used
3.3V/max. 100mA Vout
use as enable for main board 3.3V regulator if more current is
required
3.3V/max. 300mA Vout
use as enable for external regulator if more current is required
Hardware Documentation efus™A9X+ efus™A9Xr2
| 25