Table of Contents
Advertisement
Quick Links
ERA XL/XLH
Tubular motor
EN - Instructions and warnings for installation and use
IT - Istruzioni ed avvertenze per l'installazione e l'uso
FR - Instructions et avertissements pour l'installation et l'utilisation
ES - Instrucciones y advertencias para la instalación y el uso
DE - Installierungs-und Gebrauchsanleitungen und Hinweise
PL - Instrukcje i ostrzeżenia do instalacji i użytkowania
NL - Aanwijzingen en aanbevelingen voor installatie en gebruik
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Nice ERA XL
Summary of Contents for Nice ERA XL
- Page 1 ERA XL/XLH Tubular motor EN - Instructions and warnings for installation and use IT - Istruzioni ed avvertenze per l’installazione e l’uso FR - Instructions et avertissements pour l’installation et l’utilisation ES - Instrucciones y advertencias para la instalación y el uso DE - Installierungs-und Gebrauchsanleitungen und Hinweise PL - Instrukcje i ostrzeżenia do instalacji i użytkowania...
-
Page 3: Table Of Contents
ENGLISH Summary 1 - SAFETY WARNINGS AND PRECAUTIONS ......................2 1.1 - Safety warnings ..............................2 1.2 - Installation warnings .............................. 2 1.3 - Operation warnings ............................... 2 2 - PRODUCT DESCRIPTION AND INTENDED USE ....................3 3 - PRODUCT INSTALLATION ........................... 3 3.1 - Mounting dimensions ............................ -
Page 4: Safety Warnings And Precautions
• Mount the stationary control device within sight or mount the switch with off presetting of the driven part, and this • Please note that with this drive (ERA XL tubular away from moving parts and at a height of at least 1.5 m. -
Page 5: Product Description And Intended Use
PRODUCT DESCRIPTION AND PRODUCT INSTALLATION INTENDED USE 3.1 - Mounting dimensions The product is a tubular motor for automating large-size awnings and shutters. Any other use is strictly prohibited! The manufactur- er declines all liability for damage resulting from im- proper use of the product and other than as specified in this manual. -
Page 6: Tubular Motor Installation
4.5 m 5.0 m before installing the system. • The fixing plates of the ERA XL and ERA XLH tubular mo- tors are not oscillating and must be attached at right an- gles without tension to the fixing area. 120/12 •... -
Page 7: Installation In Profile Tubes
• The drives are designed for short-time operation. The coil ERA XL temperature limiter switches off once the time is exceeded. • Disconnect the drive and the coil temperature limiter – – switches on again automatically after cooling down. -
Page 8: Functional Testing Of The End Positions
5.5 - Functional testing of the end positions Allow the drive to run to the ‘up’ and ‘down’ end positions again and check the end positions. Carry out a fine adjust- ment if necessary. Crank handle connection EMERGENCY MANUAL MANOEUVRE Locking spring •... -
Page 9: Product Disposal
Switch off the drive for cleaning and maintenance. After these checks, if the motor still does not move, contact a therefore must be disposed together with the latter. specialist technician or the Nice Assistance Service. As in installation, also at the end of product lifetime, the... -
Page 10: Technical Specifications
Nice S.p.A. hereby declares that the products: ERA XL and ERA XLH comply with the essential requirements Nice reserves the right to apply modifications to the product at any time when deemed necessary, maintaining the same and other relevant provisions as established by the direc- intended use and functionality.
Need help?
Do you have a question about the ERA XL and is the answer not in the manual?
Questions and answers