Download
Share
Print this page
  1. Manuals
  2. Brands
  3. MOBILUS Manuals
  4. Headsets
  5. mobiWAN
  6. User manual

MOBILUS mobiWAN User Manual

Hide thumbs Also See for mobiWAN:

Advertisement

Quick Links

Download this manual
mobiWA
E G

Advertisement

loading
Need help?

Need help?

Do you have a question about the mobiWAN and is the answer not in the manual?

Questions and answers

Related Manuals for MOBILUS mobiWAN

Summary of Contents for MOBILUS mobiWAN

  • Page 1 mobiWA USER GUIDE...
  • Page 2 USER GUIDE mobiW N Charging Port...
  • Page 3 USER GUIDE mobiW N INSTALL ON HARD HELMET I. Insert the Ratchet Clip between the Wheel Ratchet and the suspension body. II. ttach both “L” and “R” Transducer Clips & to the suspension arms as shown. III. The Coiled Wire should stay on the outside or inside of the suspension and below the Transducer Clips &...

  • Page 4: Switch Device On/Off

    ON the mobiW N. The LED will light up White for a few seconds and the Mobilus’ tone will be heard. For the opposite operation, to switch OFF the device, you need to long press the Power Button for a few seconds.
  • Page 8 USER GUIDE mobiW N NOISY MODE OFF NOISY MODE ON Simultaneous Toggle Noisy Mode Button Press ON/OFF NOISY ENVIRONMENT MODE mobiW N has different microphone settings depending on the level of noise present in the environment in which you are operating. You can toggle ' N OISY mode' ON or OFF by pressing both the Left and Right buttons at the same time.

  • Page 9: Volume Control

    USER GUIDE mobiW N Short Press Increase in Volume Long Press Reset to Lowest Volume VOLUME CONTROL The volume of the mobiW N can be controlled two ways: 1. Directly by the volume up and down buttons of the mobile device 2.
  • Page 11 USER GUIDE mobiW N While device is OFF Long Press Reset Bluetooth RESET BLUETOOTH CONNECTION To pair the mobiW N to a new device you can choose to hard reset the bluetooth pairing on the mobiW N. To do this hold the Power Button for longer than normally required (5 seconds) on power up, you will then hear the voice prompt say ' R ESET' indicating that the bluetooth functionality is ready for pairing to a new device.
  • Page 12 USER GUIDE mobiW N While connected to mobiTALK Double Press Voice Commands VOICE COMMANDS (BETA) mobiW N together with mobiT LK app can control some functionality of the app through the use of voice commands. 
 To initiate any voice command you need to double press the Left Button . Once the audio cue is heard you can start speaking your desired voice command,...