Download
Share
Print this page
  1. Manuals
  2. Brands
  3. MOBILUS Manuals
  4. Conference System
  5. mobiWAN
  6. User manual

MOBILUS mobiWAN User Manual

Hide thumbs Also See for mobiWAN:

Advertisement

Quick Links

Download this manual
mobiW N
ENG

Advertisement

loading
Need help?

Need help?

Do you have a question about the mobiWAN and is the answer not in the manual?

Questions and answers

Related Manuals for MOBILUS mobiWAN

Summary of Contents for MOBILUS mobiWAN

  • Page 1 mobiW N USER GUIDE...
  • Page 2 USER GUIDE mobiWA Charging Port...
  • Page 3 USER GUIDE mobiWA INSTALL ON HARD HELMET I. Insert the Ratchet Clip between the Wheel Ratchet and the suspension body. II. Attach both “L” and “R” Transducer Clips & to the suspension arms as shown. III. The Coiled Wire should stay on the outside or inside of the suspension and below the Transducer Clips &...

  • Page 4: Switch Device On/Off

    O the mobiWA . The LED will light up White for a few seconds and the Mobilus’ tone will be heard. For the opposite operation, to switch OFF the device, you need to long press the Power Button for a few seconds.
  • Page 8 USER GUIDE mobiWA QUIET NORMAL NOISY Simultaneous Toggle Between Button Press Environment Profiles ENVIRONMENT PROFILE mobiWA has different microphone settings depending on the level of noise present in the environment in which you are operating. You can toggle between ' Q UIET mode' , ' ORMAL mode' and ' OISY mode' by pressing both the Left and Right buttons at the same time.

  • Page 9: Volume Control

    USER GUIDE mobiWA Short Press Increase in Volume Long Press Reset to Lowest Volume VOLUME CONTROL The volume of the mobiWA can be controlled two ways: 1. Directly by the volume up and down buttons of the mobile device 2. By separate single taps of the Right Button which will increase the volume up to the Max Volume at which point you will hear 3 beeps.
  • Page 11 USER GUIDE mobiWA While device is OFF Long Press Reset Bluetooth RESET BLUETOOTH CONNECTION To pair the mobiWA to a new device you can choose to hard reset the bluetooth pairing on the mobiWA . To do this hold the Power Button for longer than normally required (5 seconds) on power up, you will then hear the voice prompt say ' R ESET' indicating that the bluetooth functionality is ready for pairing to a new device.