5. Loosen the angle adjustment screw on the base to adjust the angle of the
camera. After the camera is adjusted to the proper angle, re-tighten the angle
adjustment screw.
(1) Rotate the adjustable rod (0°–360° adjustable).
(2) Adjust the position of the ball joint (0°–360° pan and 0°–90° tilt).
Notes:
•
According to actual needs, the camera antenna angle can be adjusted to
obtain a better signal.
•
When installing the camera, place the speaker downwards to avoid water
accumulation in the sound cavity of the speaker after rainy weather, which
might affect the sound effect.
•
To avoid water ingress, please tighten the protective cover of the microSD
card slot with with a screwdriver before use.
7
Ball joint
Base
Rod
Angle
Adjustment
Screw