Table of Contents
Advertisement
Quick Links
Thank you for purchasing our fine product!
This package contains all tools necessary for assembly.
WARNING
: Failure to follow these directions and warnings can result in serious injury
and/or product damage.
!
Assistance is required to assemble this chair.
!
Never stand on the chair or use it as a ladder.
!
Do not tip the chair when seated.
!
Periodically re-tighten all bolts and legs.
!
Do not exceed 250 lbs. (113.4 kg) weight limit on the chair.
!
If any parts become missing, damaged or worn, discontinue use until they are replaced with
identical parts.
!
Always seek assistance before moving furniture.
#628 Chair
Assembly Instructions
Give us a chance to make it right.
Do not return this item to the store. Contact our friendly customer
service department with any
for missing or damaged parts are normally shipped the same day!
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET. After business hours, leave a message.
We will return your call the next business day.
#628 CHAIR
problems or comments
. Replacements
Page 1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Dimensions Furniture 628
Summary of Contents for Dimensions Furniture 628
- Page 1 #628 Chair Assembly Instructions Thank you for purchasing our fine product! This package contains all tools necessary for assembly. Give us a chance to make it right. Do not return this item to the store. Contact our friendly customer service department with any problems or comments .
- Page 2 #628 Chair Assembly Instructions PARTS LIST Part Part Name Qty. Part Part Name Qty. Drawing Drawing BACK SEAT FRAME FRAME LEFT RIGHT SEAT BACK CUSHION CUSHION DUST PILLOW COVER LONG BOLT W/ WASHERS ALLEN SHORT BOLT W/ WASHERS WRENCH Step 1 - Remove all parts from their packaging and confirm that the quantities match those listed above.
- Page 3 #628 Chair Assembly Instructions Step 2 - Lay the Back Frame (Part A) on a flat surface, such as a carpeted floor. Align the bolt holes in the back of the Seat Frame (Part B) with the bolt holes in the bottom-front of the Chair Back.
- Page 4 #628 Chair Assembly Instructions Step 5 - Align the bolt holes in the Right Arm (Part C) with the bolt holes in the right side on the Seat and Back Frame. Hand thread two Long Bolts with Washers (Part J) clockwise through the two upper bolt holes in the Seat Frame into the Right Arm.
- Page 5 #628 Chair Assembly Instructions Step 7 - With help, set the #628 chair frame onto its bottom and lift the rear Velcro® attached cover on the back to expose the frame. Step 8 - Hand thread two Short Bolts with Washers (Part K) clockwise through the Back Frame and into one Arm.
- Page 6 #628 Chair Assembly Instructions Step 11 - Attach the Velcro® attached Dust Cover (Part H) to the bottom of the chair. Dust Cover - H Step 12 - Screw a Leg (Part I) clockwise into each of the four holes in the bottom of the chair. Fully tighten the legs but do not over tighten.
- Page 7 #628 Chair Assembly Instructions Step 13 - Place the Seat Cushion (Part E) onto the Seat Frame so that the zipper faces the Back Frame. Back Frame - A Seat Cushion - E Step 14 - Place the Back Cushion (Part F) upright on the Seat Cushion so that the zipper faces towards the Seat Cushion.
- Page 8 #628 Chair Assembly Instructions Step 15 - Place the Pillow (Part G) upright on the Seat Cushion so that the zipper on the Pillow faces towards the Seat Cushion. G - Pillow Congratulations, assembly is complete. Give us a chance to make it right.
Need help?
Do you have a question about the 628 and is the answer not in the manual?
Questions and answers