Integrating with Experion
The FEWIO device is natively integrated with Experion system. All parameter read and
write, configuration support is provided in Experion for the FEWIO device through the
ISA100 DD file.
FEWIO comes as an uncommissioned ISA 100 device in Experion Control Builder, just like
any other ISA100 field device. It is commissioned and configured like other ISA100 field
devices.
To configure the Modbus Registers of FEWIO:
BLE Options is only applicable to FDAP Gen3
and FDAP Gen3 Anchor
ATTENTION
Click Apply.
3.
The device drops out from the network and rejoins as an FDAP router.
Make sure that FEWIO DD file is loaded in Control Builder.
1.
FDAP as FWIO, FDAP Gen3, and FDAP Gen3 Anchor as FEWIO role
has different DD files
ATTENTION
Commission the FEWIO device in Control Builder.
2.
Once commissioned, the FEWIO appears in Control builder as shown in the following
3.
figure.
OWDOC-X256-en-323A
FIELD EXPANDABLE WIRELESS IO
60