Table of Contents
Advertisement
Testing Ethernet connection for FDAP2
Power on and startup
FDAP Gen3 and FDAP Gen3 Anchor
PIN #
TIA/EIA 568A
4
5
6
7
8
A standard RJ-45 modular jack is available on the FDAP2 Power and IO board. The RJ-45
jack may be used to test cable integrity after terminating the cable at the IDC connector.
After terminating the field cable at the IDC, connect the cable tester to the RJ-45 jack. An
end-to-end cable test can then be performed to ensure proper wiring at the IDC connector.
The FDAP Gen3 and FDAP Gen3 Anchor have one Ethernet cable and one power cable. has
six status LEDs to indicate the various stages of operation.
OWDOC-X256-en-323A
TIA/EIA 568B
Data
Unused
Unused
Receive-
Unused
Unused
33
Advertisement
Table of Contents
