Basic Control - Planar RPS User Manual

Basic Control

Command Description
BACKLIGHT. Brightness 1400 =?+-
INTENSITY Intensity
POWER. External Device 2702 =
COMMAND Power
QCONFIG Big Picture 505 =?
Configure
SYSTEM.POWER System Power 1408 =?+-
SYSTEM.REBOOT System Reboot 2402 !
1
Updated
Planar RPS and Video Controller RS232 User Guide
020-1332-00I
Modifiers Operands
0-100
PSW# or 0=DISABLE=OFF=NO=
PSW,ALL FALSE
PSW,GROUP 1=ENABLE=ON=YES=
PSW,NAME TRUE
PS# 2=CYCLE
VC#.IN#
0=DISABLE=OFF=NO=
FALSE
1=ENABLE=ON=YES=
TRUE
Example
BACKLIGHT.INTENSITY? Gets / sets the intensity of the display.
BACKLIGHT.INTENSITY:80
POWER.COMMAND(PSW3)=OFF Sets the main power output of the
POWER.COMMAND(PSW3):"OFF" specified device. Second modifier may be
POWER.COMMAND(PSW,NAME)=CYCLE used to change bulk states of devices by
"LEFT COLUMN" 5 predefined tags.
POWER.COMMAND(PSW,NAME): Operand CYCLE may be followed by an
"CYCLE" "LEFT COLUMN" "5" integer that denotes a delay time in
seconds for the specified device to change
from the opposite power state back to its
current power state. If no number is
entered, 10 seconds is used. CYCLE does
not apply to modifier PS#.
Power supplies set to off toggle the AC
input to the RPSM.
QCONFIG=VC2.IN3 Gets / sets Big Picture of wall to specified
QCONFIG:VC2.IN3 sources.
SYSTEM.POWER=ON Toggles system power between on and off. No
SYSTEM.POWER:ON
SYSTEM.REBOOT Reboots the system and all system
SYSTEM.REBOOT:@ACK powered connected components.
RS232 Codes
Notes
No 2.0 No No
Yes 8.0 Yes No
1
10.0
No 2.0 No No
1.x Yes Yes
No 2.0 Yes Yes
Page | 14