第 4 章 詳細設定の構成; Uefi Bios Setup Utility; Enter The Uefi Bios Setup Utility; Change The Startup Sequence - Lenovo 13w Yoga Manual

第 4 章 詳細設定の構成

UEFI BIOS setup utility

UEFI BIOS setup utility is the first program that the computer runs. When the computer turns on, UEFI BIOS setup
utility performs a self test to make sure that various devices in the computer are functioning.

Enter the UEFI BIOS setup utility

Restart the computer. When the logo screen is displayed, press F2 to enter the UEFI BIOS setup utility.

Change the startup sequence

You might need to change the startup sequence to allow the computer to start from another device or a network location.
1. Enter the setup utility.
2. Navigate to the Boot menu.
3. Follow the on-screen instructions to change the order of devices under Boot Priority Order.
注：You can also change the startup sequence temporarily without opening the setup utility. To do so, start the
computer. When the logo screen is displayed, press F12.
ホットキー・モードの変更
1. Setup Utility を開きます。
2. 「Configuration」 ➙ 「Hotkey Mode」を選択し、Enter キーを押します。
3. 設定を 「Disabled」 または 「Enabled」に変更します。
4. 「Exit」 ➙ 「Exit Saving Changes」を選択します。

Enable or disable the Always On USB function

For computer models with the Always On USB connector, the always-on function can be enabled or disabled in the
setup utility.
1. Open the setup utility.
2. Select Configuration ➙ Always On USB and press Enter.
3. Change the setting to Disabled or Enabled.
4. Select Exit ➙ Exit Saving Changes.
パスワードの使用
ここでは、Setup Utility で設定できるパスワードの種類について説明します。

Password types

You can set various types of passwords in the UEFI BIOS setup utility.
注：
• All passwords set in the setup utility consist of alphanumeric characters only.
• If you start the setup utility using the user password, you can only change a few settings.
© Copyright Lenovo 2022
19