Huawei EchoLife HG8245W5-6T Quick Start Manual page 8

EchoLife HG8245W5-6T
Quick Start for QR code
No.
1
2
3
4
5
6
7
8
Issue 05 (2022-12-08)
NO TE
● The fiber connector connected to the optical port on the wall varies depending on
actual conditions.
● To ensure normal use of fibers, make sure that the fiber bending radius is larger than 30
mm.
Item Description
On/Off Powers the ONT on or off.
Power Connects to a power adapter.
TEL1- Connects to the ports on a telephone or fax machine.
TEL2
LAN1- Connects to PCs or IP set-top boxes (STBs).
LAN4
USB Connects to USB storage devices.
Reset Press the button for a short time to reset the device, or
press the button for a long time (longer than 10s) to restore
the device to the default settings and reset the device.
NOTE
Reset Huawei ONTs with caution. Otherwise, the ONTs may fail to
access the Internet. If an ONT cannot access the Internet after a
reset, contact your Internet service provider.
Optical The optical port is equipped with a rubber plug and
port connected to a fiber for upstream transmission.
The type of the optical connector connected to the optical
port can be SC/APC.
WPS/ ● When the wireless function (WLAN) is enabled, press the
WLAN WPS/WLAN switch for 1s to 5s to start Wi-Fi protected
setup (WPS) negotiation.
● When the wireless function (WLAN) is enabled, press and
hold the button WPS/WLAN switch for more than 5s to
turn off the wireless function (WLAN).
● When the wireless function (WLAN) is disabled, tap the
WPS/WLAN switch for more than 1s to turn on the
wireless function (WLAN).
NOTE
Copyright © Huawei Technologies Co., Ltd.
If the WLAN indicator is steady on or blinks, the wireless
function is enabled. If the WLAN indicator is off, the wireless
function is disabled.
2 Connecting Cables
5