Advertisement
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
The foam cutter is a professional hot knife to cut foamed plastics. It heats up in a matter of seconds and
allows its user to precisely control the temperature.
Safety instructions
•
Before use, check the device for completeness and functionality.
•
Never use a damaged or non-operational device.
•
Should the device be damaged, you should have it repaired by a qualified person.
•
Do not apply too great a force when using the device.
•
Never leave the device near children without supervision.
•
The device is not intended for use by persons (including children) with impaired or limited phys-
ical, sensory, and mental abilities or lack of experience and/or real knowledge, unless they are
supervised by a person responsible for their safety or follow the instructions made by this person
on how to correctly use the device.
•
Obey all instructions and indications of this user's manual to avoid damaged and injuries.
•
Only operate the device in well-ventilated areas.
•
Do not touch the blade during heating and do not bring it near flammable materials after heating.
•
Do not touch the blade until is has cooled down.
•
Do not burn away residues present on the lame; this would deform the blade.
•
Do not use the cutter in wet conditions and keep it away from rain.
•
Only cut materials that the device it designed for.
Main parts
№
Name
1
Temperature control
2
Power LED
3
Blade
https://www.XPOtool.com
The Tool Experts
Burning hazard!
№
Name
4
Switch-on button
5
Blocking screw
6
Blade-holder
Item 63407
Page 3
07 2022-1
Advertisement
