Download Print this page

XPOtool 61952 Operation Manual

Cable stripping machine

Cable Stripping Machine

61952

Illustration similar, may vary depending on model

Read and follow the operating instructions and safety information before using for the first time.

Technical changes reserved!

Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.

Updating the documentation

If you have suggestions for improvement or have found any irregularities, please contact us.

Table of Contents

Need help?

Do you have a question about the 61952 and is the answer not in the manual?

Page 1 Operation Manual Cable Stripping Machine 61952 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Page 2 To allow for a smooth execution of your complaint or return, it is important to contact our customer service team before returning the goods. Returns Department WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler E-mail: service@wiltec.info Tel: +49 2403 55592–0 Fax: +49 2403 55592–15 https://www.XPOtool.com Item 61952 Page 2 The Tool Experts 09 2022-1...
Page 3 The diameter of the cable is too small. ◦ The blade is not positioned in the centre and has therefore to be adjusted. ◦ The blade has gotten dull and needs to be sharpened/replaced. ◦ https://www.XPOtool.com Item 61952 Page 3 The Tool Experts 09 2022-1...
Page 4 Hand crank or drill Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH. https://www.XPOtool.com Item 61952 Page 4 The Tool Experts 09 2022-1...