XPOtool 62058 Operation Manual

Three-roll bending machine

Three-roll Bending Machine

62058

Illustration similar, may vary depending on model

Please read and follow the operating instructions and safety information prior to initial operation.

Technical changes reserved!

Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further

developments.

Table of Contents

Need help?

Do you have a question about the 62058 and is the answer not in the manual?

Page 1 Operation Manual Three-roll Bending Machine 62058 Illustration similar, may vary depending on model Please read and follow the operating instructions and safety information prior to initial operation. Technical changes reserved! Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further...
Page 2 To allow for a trouble-free complaint or return, it is important to contact our customer service team before returning your goods. Retourenabteilung WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler Germany E-mail: service@wiltec.info Tel: +49 2403 55592–0 Fax: (+49 2403 55592–15) https://www.XPOtool.com Item 62058 Page 2 The Tool Experts 05 2022-1...
Page 3 Storage • Store the device in a safe place when not using it for a long time. • Keep it in a dry, well-ventilated place and out of children’s reach. https://www.XPOtool.com Item 62058 Page 3 The Tool Experts 05 2022-1...
Page 4 • After bending, loosen all fixing elements (fixing screws, adjustment screws, etc.). Remove roll 1 (10) to be able to remove the piece on the right side of the machine. https://www.XPOtool.com Item 62058 Page 4 The Tool Experts 05 2022-1...
Page 5 Screw Roll 2 Gear wheel Roll 1 Screw Important Note: Reproduction and any commercial use (of parts) of this operating manual, requires a written permission of WilTec Wildanger Technik GmbH. https://www.XPOtool.com Item 62058 Page 5 The Tool Experts 05 2022-1...