Mitsubishi Electric PUHZ-RP35VHA2 Service Manual page 23
Split-type, heat pump air conditioners
Hide thumbs
Also See for PUHZ-RP35VHA2:
- Service manual (186 pages) ,
- Technical data manual (126 pages) ,
- Service manual (150 pages)
Advertisement
OPERATING PROCEDURE
14. Removing the compressor (MC)
(1) Remove the service panel. (See Figure 1)
(2) Remove the top panel. (See Figure 1)
(3) Remove 2 front cover panel fixing screws (5 × 10) and
remove the front cover panel. (See Photo 3)
(4) Remove 2 back cover panel fixing screws (5 × 10) and
remove the back cover panel.
(5) Remove the electrical parts box. (See Photo 3)
(6) Remove 3 valve bed fixing screws (4 × 10) and 4 ball valve
and stop valve fixing screws (5 × 16) and then remove the
valve bed.
(7) Remove 3 right side panel fixing screws (5 × 10) in the
rear of the unit and then remove the right side panel.
(8) Remove 3 separator fixing screws (4 × 10) and remove
the separator.
(9) Recover refrigerant.
(10) Remove the 3 points of the compressor fixing
nut using a spanner or a adjustable wrench.
(11) Remove the welded pipe of compressor inlet
and outlet and then remove the compressor.
Note: Recover refrigerant without spreading it in the air.
15. Removing the power receiver
(1) Remove the service panel. (See Figure 1)
(2) Remove the top panel. (See Figure 1)
(3) Remove 2 front cover panel fixing screws (5 × 10) and
remove the front cover panel. (See Photo 3)
(4) Remove 2 back cover panel fixing screws (5 × 10) and
remove the back cover panel.
(5) Remove the electrical parts box. (See Photo 3)
(6) Remove 3 valve bed fixing screws (4 × 10) and 4 ball valve
and stop valve fixing screws (5 × 16) and then remove the
valve bed.
(7) Remove 3 right side panel fixing screws (5 × 10) in the
rear of the unit and then remove the right side panel.
(8) Recover refrigerant.
(9) Remove 4 welded pipes of power receiver inlet and outlet.
(10) Remove 2 receiver leg fixing screws (4 × 10).
Note: Recover refrigerant without spreading it in the air.
Photo 20
Valve bed
Separator
Separator
fixing screw
Photo 21
Compressor
(MC)
153
PHOTOS
Valve
bed fixing
screws
Power
receiver
Compressor
(MC)
Compressor
fixing nut
Receiver leg
fixing screws
Inlet
Outlet
Power
receiver
Receiver
leg
Advertisement
