Table of Contents
Advertisement
Available languages
Available languages
EN
Double Insulation
This power tool is double insulated. This means that all external metal parts of the tool are insulated against electricity. This is achieved by placing insulating
parts between the electrical and mechanical parts of the tool.
Kickback and other warnings
Kicking is a sharp reaction of the tool when the disc hits an object or gets stuck somewhere on the workpiece. When this happens the tool is pushed towards
the user and cause serious injury. Kicking is the result of misuse or incorrect operation and can be avoided by following the steps below.
• Hold the tool firmly and stand firmly. Use the extra handle (if provided) and maximum anti-kickback control.
• Do not place your body where the tool can move or kick.
• Be careful when working in corners or near sharp objects, etc. You may lose control of the tool and cause serious injury.
READ THE USER MANUAL
USE PROTECTION MASK
DOUBLE CONSENT
ATTENTION !
USE GLASSES FOR PROTECTION
USE WORK HEADPHONES
THIS APPLIANCE SHOULD NOT BE DISPOSED OF WITH NORMAL HOUSEHOLD WASTE.
HAND IT IN TO THE APPROPRIATE COLLECTION CENTRE IN YOUR MUNICIPALITY.
4
TECHNICAL CHARACTERISTICS
Operating voltage/Frequency
Power
No load revolutions per minute
Chock diameter
Route
WWW.BORMANNTOOLS.COM
230 V /50 Hz
2000 W
600 - 23000 RPM
12 mm
0- 60 mm
Advertisement
Table of Contents
