Page 1
SERVICE FOR YOUR NADY AUDIO PRODUCT (U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-2411, or e-mail at service@nady.com. (International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased this product.
Page 2
Operation Connected to Instrument The ADI-2 can be used to connect the unbalanced output of an instrument or line level device (eg. guitar, bass, synthesizer, effects module, another mixer) to the balanced input of a mixer or amplifier. Set the GUITAR/SPEAKER (3) switch to GUITAR for this application.
Page 3
(5) 1/4" LINK OUTPUTS Unbalanced 1/4" output jack which is in parallel with the input jack. This allows the ADI-2 to be used as a Y-splitter by sending the input signal to another device via the 1/4" output as well as sending it from the balanced XLR output.