Gree GWH07AAAXA-K3NNA5A Service Manual page 82

Service Manual
Step
7.Remove evaporator assy
Remove 3 screws fixing evaporator assy.
a
At the back of the unit, Loosen the clasp,connection
b
pipe clamp and then remove the connection pipe
clamp.
First remove the left side of evaporator from the groove
c
of bottom shell and then remove the right side from the
clasp on the bottom shell.
d Adjust the position of connection pipe on evaporator
slightly and then lift the evaporator upwards to remove
it.
Installation and Maintenance
Procedure
Screw
Connection pipe clamp
Clasp
Groove
Rear Case assy
Evaporator assy
Connection pipe
79