Overview Components - Bresser T-16 Instruction Manual

with acid, rinse the affected areas immediately with plenty of clean water
and seek medical attention.
FIRE/EXPLOSION HAZARD!
Do not expose the device to high temperatures. Use only the supplied
AC adapter or the recommended batteries. Do not short-circuit the
device or batteries or dispose of in fire! Excessive heat and improper
handling can cause short circuits, fires and even explosions!
Do not subject the device to excessive vibrations.
NOTE!
Do not disassemble the device! In the event of a defect, please contact
your dealer. They will contact the Service Centre and can arrange the
return of this device for repair if necessary.
Only carry out cleaning and maintenance work on the device as
described in the Instruction manual.
Only use accessories and spare parts for this device that comply with the
technical specifications.
SCOPE OF DELIVERY (Fig. 1)
Transmitter (A), receiver (B), jack plug adapter (3.5 to 6.3 mm) (C), 1 x
type 23A battery (for transmitter)
Also required (not included):
Small Phillips screwdriver (X), 2 x AAA/LR03 batteries (for receiver), power
cable (from flash unit)

Overview components

Transmitter (Fig. 2)
1. Flash test button
2. Function light (transmission)
3. Cruciform screw
4. Flash contact
5. Locking wheel
6. PC connection socket
7. DIP switches (channel selection)
8. Battery holder (with battery type 23A, pre-installed)
6
*not included with the purchase