Table of Contents
Advertisement
SYSTEM CONTROLS
Power Switch:
The main AC power switch is located on the rear panel by the IEC inlet socket for the AC power.
Trigger Control:
The XdA power status can be controlled several different ways through the External Trigger switch
located on the rear panel. When the Trigger Mode is set to On, the XdA power will always be on. When
set to Audio, the XdA will automatically power up whenever it detects an audio signal at either of the
inputs. When set to Ext., the XdA will power up whenever it detects a 12VDC signal at the External
Trigger input. When the XdA powers up from the power switch or any of the trigger sources, there may
be a slight tick heard through the speakers. This is normal.
Advertisement
Table of Contents
